All Services

Liquid Fuel Portable Generator
1MW Continuous Duty. 1.1MW Standby peak
Highly portable with built-in air lift rigging
Size: 13’L x 5’W x 7.5’H
Weight: 10,500 lbs

Turbine Marine 1MW (TM1000 kW) Generator Set is based on well-known, time-proven technology and components, together with a state-of-the-art operating system that operates in real time while providing true deterministic control.

This system is designed to operate using gaseous fuel or optional liquid fuels

03
  • Generator skid
  • ISO or CNG gas ready
  • Liquid or CNG Gas ready
  • Option: Duel Fuel Ready (Liquid and Gas)
  • Hz 50 / 60 Hz
  • Voltages: 440- 480VAC /600VAC / 4160 VAC / 7.2KV / 13.8KV
04
  • ISO Container ready
  • Liquid or CNG Gas ready
  • Option: Duel Fuel Ready (Liquid and Gas)
  • Hz 50 / 60 Hz
  • Voltages: 440- 480VAC /600VAC / 4160 VAC / 7.2KV / 13.8KV
  • ISO Container ready
  • Liquid or CNG Gas ready
  • Option: Duel Fuel Ready (Liquid and Gas)
  • Hz 50 / 60 Hz
  • Voltages: 440- 480VAC /600VAC / 4160 VAC / 7.2KV / 13.8KV
06
  • 92db’s at 10m No Load
  • 96db’s at 3m Full Load
  • 85db’s at 3m with Muffler Option
07
  • Diesel, Gasoline, Jet A, JP8, TS1, Kerosene, Bio Diesel
  • Fuel Flow 500kW 66gph/250lph
  • Fuel Flow 850kW 93gph/352lph
  • Fuel Flow 1000kW 115gph/435lph
  • Simultaneous multiple fuel capable
08
  • Over-speed
  • Over-temperature
  • Loss of flame
  • Combustion monitor
  • Lube temperature and pressure monitor
  • Fail-safe operation of trip devices
  • Vibration
09
  • Starting fuel control
  • Gas turbine speed control and topping
  • Drive shaft speed control and topping
  • Power output set-point and topping control
  • Engine exhaust temperature limiting
  • Acceleration limiting
  • Deceleration limiting
  • Maximimum fuel limiting
  • Minimum fuel limiting
  • Fuel gas supply pressure following
  • Gas/liquid fuel transfer control
  • Engine inlet guide vane scheduling
10
  • Automatic start sequencing
  • Lube oil monitoring
  • Control modes (off/crank/run/cool-down)
  • Stop sequence (unload, breaker, open, cool-down)
  • Auto-manual synchronization
  • Automatic start and stop time configuration